TERAFLEX JL 2-DOOR 2.5” COIL SPRING BASE LIFT KIT – NO SHOCK ABSORBERS

SKU: 1354202
Out of stock

2.782,61 ر.س inc. Vat

Add to Wishlist
Add to Wishlist
Out of stock

Did you like this product? Add to favorites now and follow the product.

Add to Wishlist
Add to Wishlist

Description

The ultra-simple TeraFlex JL 2dr: 2.5” Coil Spring Base Lift Kit comes with the basic parts needed to fit larger tires for increased ground clearance for better off-road capability without compromising on road handling.

Does NOT include shocks. We recommend Falcon Performance SP2 Mode Adjust Shocks or TeraFlex 9550 VSS Twin-Tube Shocks. These are the only shock absorbers engineered to work with TeraFlex lift coil springs to improve both compression and rebound for optimal vehicle stability. 2.5” Coil Spring Base Lift Kits are offered with TeraFlex 9550 VSS Twin-Tube Shocks or without shock absorbers. Falcon Performance Shocks are available separately.

Max Tire Diameter:

• Sport/Sahara Fenders: 35” (w/ 3” front & 2.5” rear bump stops)
• Rubicon Fenders: 35” (w/ 2” front & 2” rear bump stops)
• Rubicon Fenders: 37” (w/ 2.5” front & 3” rear bump stops)

Note(s):

• Caster correction recommended, but not required – NOT INCLUDED. Proper suspension geometry ensures all stability controls function w/in factory parameters. The following components are recommended to optimize caster and pinion angles and restore factory steering and suspension geometry: Front Lower Sport Control Arm Kit (# 1253000), or Front Control Arm Sport Brackets (# 1938125), or adjustable 8-Arm Alpine [IR] Short Control Arm Kit (Alpine: # 1416610 | Alpine IR: 1416510), Rear Track Bar Bracket (2.5-4.5” Lift) (# 1953600), and/or adjustable Alpine IR Front Track Bar (# 1753420).
• Requires aftermarket wheels w/ 4.75” backspacing or less – or Offset Wheel Adapters (# 1057000) for stock wheels – NOT INCLUDED.
• Models with plastic bumpers require removal of bumper-to-fender wind deflector/splash guards in order to fit 35” or larger tires.
• Sport/Sahara Fenders require 3” front and 2.5” rear bump stop extensions and shims (INCLUDED) in order to fit 35” tires.
• Rubicon Fenders require 2” front and 2” rear bump stop extensions (INCLUDED) in order to fit 35” tires.
• Rubicon Fenders require 2.5” front and 3” rear bump stop extensions and shims (INCLUDED) in order to fit 37” tires.
• Requires longer shocks – NOT INCLUDED in base kit – we recommend Falcon Performance SP2 Mode Adjust Shocks

Additional information

brands

JEEP WRANGLER JL

parts

Lift Kits & Suspension

Size

2.5" For 2 Doors

years

2018, 2019, 2020, 2021, 2022, 2023

Reviews

There are no reviews yet.

Be the first to review “TERAFLEX JL 2-DOOR 2.5” COIL SPRING BASE LIFT KIT – NO SHOCK ABSORBERS”

Your email address will not be published. Required fields are marked *

Quick Comparison

SettingsTERAFLEX JL 2-DOOR 2.5” COIL SPRING BASE LIFT KIT – NO SHOCK ABSORBERS removeHurricane Performance Shocks 2", Without Reservoir for Jeep Wrangler JL/JT removeHurricane Performance Lift Kit For Jeep Wrangler JL removeHurricane Performance Shocks 2", With Reservoir, Non-Adjustable for Jeep Wrangler JK removeFox 2.0 Performance Series Smooth Body IFP Shocks for Jeep Wrangler JK removeFox Performance Series 2.0 IFP Steering Stabilizer for Jeep Wrangler JT/JL & JK remove
NameTERAFLEX JL 2-DOOR 2.5” COIL SPRING BASE LIFT KIT – NO SHOCK ABSORBERS removeHurricane Performance Shocks 2", Without Reservoir for Jeep Wrangler JL/JT removeHurricane Performance Lift Kit For Jeep Wrangler JL removeHurricane Performance Shocks 2", With Reservoir, Non-Adjustable for Jeep Wrangler JK removeFox 2.0 Performance Series Smooth Body IFP Shocks for Jeep Wrangler JK removeFox Performance Series 2.0 IFP Steering Stabilizer for Jeep Wrangler JT/JL & JK remove
Image
SKU1354202JL0103-128HJK0103-105HJK0103-115
Rating
Price 2.782,61 ر.س inc. Vat 2.290,00 ر.س 1.800,00 ر.س 3.300,00 ر.س 3.254,00 ر.س 1.100,00 ر.س
Stock
Out of stock
Out of stock
Out of stock
Out of stock
Out of stock
Out of stock
AvailabilityOut of stockOut of stockOut of stockOut of stockOut of stockOut of stock
Add to cart

Read more

Read more

Select options

Read more

Read more

Read more

Description
ContentThe ultra-simple TeraFlex JL 2dr: 2.5” Coil Spring Base Lift Kit comes with the basic parts needed to fit larger tires for increased ground clearance for better off-road capability without compromising on road handling. Does NOT include shocks. We recommend Falcon Performance SP2 Mode Adjust Shocks or TeraFlex 9550 VSS Twin-Tube Shocks. These are the only shock absorbers engineered to work with TeraFlex lift coil springs to improve both compression and rebound for optimal vehicle stability. 2.5” Coil Spring Base Lift Kits are offered with TeraFlex 9550 VSS Twin-Tube Shocks or without shock absorbers. Falcon Performance Shocks are available separately. Max Tire Diameter: • Sport/Sahara Fenders: 35” (w/ 3” front & 2.5” rear bump stops) • Rubicon Fenders: 35” (w/ 2” front & 2” rear bump stops) • Rubicon Fenders: 37” (w/ 2.5” front & 3” rear bump stops) Note(s): • Caster correction recommended, but not required – NOT INCLUDED. Proper suspension geometry ensures all stability controls function w/in factory parameters. The following components are recommended to optimize caster and pinion angles and restore factory steering and suspension geometry: Front Lower Sport Control Arm Kit (# 1253000), or Front Control Arm Sport Brackets (# 1938125), or adjustable 8-Arm Alpine [IR] Short Control Arm Kit (Alpine: # 1416610 | Alpine IR: 1416510), Rear Track Bar Bracket (2.5-4.5” Lift) (# 1953600), and/or adjustable Alpine IR Front Track Bar (# 1753420). • Requires aftermarket wheels w/ 4.75” backspacing or less – or Offset Wheel Adapters (# 1057000) for stock wheels – NOT INCLUDED. • Models with plastic bumpers require removal of bumper-to-fender wind deflector/splash guards in order to fit 35” or larger tires. • Sport/Sahara Fenders require 3” front and 2.5” rear bump stop extensions and shims (INCLUDED) in order to fit 35” tires. • Rubicon Fenders require 2” front and 2” rear bump stop extensions (INCLUDED) in order to fit 35” tires. • Rubicon Fenders require 2.5” front and 3” rear bump stop extensions and shims (INCLUDED) in order to fit 37” tires. • Requires longer shocks – NOT INCLUDED in base kit – we recommend Falcon Performance SP2 Mode Adjust ShocksJeep Wrangler Hurricane Performance Shocks 2", Without Reservoir, applicable for 1" to 3" Lift Kit for JL Our goal is to provide very durable, high quality lift kits and shocks to meet all requirements of driving both on and off roads. All hurricane lift kits and shocks have been tested by a professional team to ensure we meet our customers needs. Specifications:
  • Body: 2" size, Smooth bore, Clear coated, Zinc Plated
  • Shaft: 18mm hard chrome plated 4130 steel
  • Piston: Race-developed, High-flow piston design
  • Valving: Proprietary deburred valve shims
  • Seals: High temperature Viton seals
  • Oil: Germany fucs formulated ultimate performance at variable temperatures
  • Reservoir: NA
  • Mounting: Bearing and rubber selected
  • Extended: Rear: 30cm, Front: 26.5cm
  • Gas Pressure: Adjustable, 80-200psi
Jeep Wrangler Hurricane Performance Lift Kit for JL Instantly gain an aggressive look and commanding stance that will truly set your JL apart from the pack, while retaining a smooth factory-like ride. We will guarantee that our Lift kit won't need an adjustment kit like other brands to maintain the height. And we will give guarantee for comfort road driving as well. It is available in 2.5 and 3 inch, for 2 Doors and 4 Doors It is available for 2 Doors (Silver) and 4 Doors (Grey) Our goal is to provide very durable, high quality lift kits and shocks to meet all requirements of driving both on and off roads. All hurricane lift kits and shocks have been tested by a professional team to ensure we meet our customers needs.
  • If planning on running 35in tires on factory wheels, double check clearance between the front tire, lower control arm and sway-bar links
Jeep Wrangler Hurricane Performance Shocks 2", With Reservoir, Non-Adjustable, applicable for 1" to 3" Lift Kit, JK Our goal is to provide very durable, high quality lift kits and shocks to meet all requirements of driving both on and off roads. All hurricane lift kits and shocks have been tested by a professional team to ensure we meet our customers needs. Specifications:
  • Body: 2" size, Smooth bore, Clear coated, Zinc Plated
  • Shaft: 18mm hard chrome plated 4130 steel
  • Piston: Race-developed, High-flow piston design
  • Valving: Proprietary deburred valve shims
  • Seals: High temperature Viton seals
  • Oil: Hurricane Racing Shocks Oil Formulated ultimate performance at variable temperatures
  • Reservoir: Piggyback for the front and rear  shocks, Remote reservoir for the rear shocks
  • Mounting: Bearing and rubber selected
  • Gas Pressure: Adjustable, 80-200psi
Jeep Wrangler Fox 2.0 Performance Series Smooth Body IFP Shocks for JK The Performance Series 2.0 IFP smooth body shocks contain the latest in shock technology to transform the performance of your Truck or SUV. They use our race-proven damping control to provide a comfortable on-road ride and predictable off-road handling in even the toughest conditions. The precision metal impact aluminum body increases cooling capacity and will never rust. Inside you will find our race-proven performance valving technology. Our Internal Floating Piston (IFP) mono-tube design separates the shock oil from the high-pressure, nitrogen-charged gas chamber. The IFP eliminates oil aeration allowing maximum performance from the factory-tuned precision valving. The race developed high flow damping piston matched with application specific valving provides the Performance Series 2.0 IFP shock a predicable ride quality capable of handling the roughest road conditions.
BODY 2.0” Impact extruded and CNC machined 6061-T6 clear anodized aluminum one-piece body resists rust over time
BODY PLATING Clear-anodized for a durable finish
RESERVOIR Internal IFP mono-tube reservoir design
COMPONENTS Black-anodized, CNC-machined 6061-T6 billet aluminum
SHAFT 5/8" hard chrome plated heat-treated alloy steel
PISTON Race-developed high-flow piston design
VALVING Application specific valving to maximize performance
SEALS Redundant sealing pack system main seal, wiper seal, scraper seal
BUSHINGS Quiet nitrile rubber allows for increased suspension articulation
EXTENDED 24.820 Inch [Rear], 25.470  Inch [Front]
COMPRESSED 15.700 Inch [Rear], 15.850 Inch [Front]
TRAVEL 9.120 Inch [Rear], 9.620  Inch [Front]
TOP MOUNT Bar Pin Inch [Rear], Stem Top Inch [Front]
BOTTOM MOUNT Eyelet
Manufacture Part Number for the Shocks:
  • Rear 980-24-888
  • Front 980-24-887
MADE IN USA
Jeep Wrangler Fox Steering Stabilizer for JT/JL & JK The Performance Series 2.0 IFP steering stabilizer helps take the load off your steering components and keep your tires tracking straight and true. Oversized off-road tires have a tendency to seek out traction in any direction. The large knobs and open tread pattern can cause your front end to wander on or off the road. The Performance Series 2.0 IFP stabilizer uses the same advanced damping technology contained in our Performance Series shocks to tame steering feedback from even the most aggressive tires.
BODY 2.0” Impact extruded and CNC machined 6061-T6 clear anodized aluminum one-piece body resists rust over time
BODY PLATING Clear-anodized for a durable finish
RESERVOIR Internal IFP mono-tube reservoir design separates shock oil from the high-pressure nitrogen
COMPONENTS Black-anodized, CNC-machined 6061-T6 billet aluminum
SHAFT 1/2" hard chrome plated heat-treated alloy steel
PISTON Race-developed high-flow piston design
VALVING Application specific valving to maximize performance
SEALS Redundant sealing pack system main seal, wiper seal, scraper seal
BUSHINGS Quiet nitrile rubber allows for increased suspension articulation
OPTIONS Roost Shield »
EXTENDED 20.950
COMPRESSED 13.500
TRAVEL 7.450
TOP MOUNT ES15
BOTTOM MOUNT Eyelet
  PN: 985-24-173 MADE IN USA
WeightN/AN/AN/AN/AN/AN/A
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
brands

JEEP WRANGLER JL

parts

Lift Kits & Suspension

Size

2.5" For 2 Doors

years

2018, 2019, 2020, 2021, 2022, 2023

brands

JEEP WRANGLER JL, JEEP WRANGLER JT (GLADIATOR)

parts

Lift Kits & Suspension

years

2019, 2020, 2021, 2022

brands

JEEP WRANGLER JL

parts

Lift Kits & Suspension

years

2019, 2020, 2021, 2022

Size

2.5" For 2 Doors, 2.5" For 4 Doors, 3" For 2 Doors, 3" For 4 Doors

brands

JEEP WRANGLER JK

parts

Lift Kits & Suspension

years

2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018

brands

JEEP WRANGLER JK

parts

Lift Kits & Suspension

years

2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018

brands

JEEP WRANGLER JK, JEEP WRANGLER JL, JEEP WRANGLER JT (GLADIATOR)

parts

Lift Kits & Suspension

years

2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022